--------------------------------------------------------------------------------------------

                              Vector WDM/WDF Driver

                                      for

                    Windows XP (32 Bit), Windows Vista (32 Bit),
                  Windows 7 (32 Bit/64 Bit) and Windows 8 (64 Bit)
                             


                       Vector Informatik GmbH, Stuttgart

--------------------------------------------------------------------------------------------

Vector Informatik GmbH 
Ingersheimer Strae 24 
70499 Stuttgart 
Germany 

Phone: ++49 - 711 - 80670 - 200 
Fax:   ++49 - 711 - 80670 - 555 


--------------------------------------------------------------------------------------------

Content 
------- 
1.  Supported Operating Systems
1.1 Operating system requirements
2.  Device Driver Installation, Update and Uninstall
3.  Vector Hardware Configuration utility (vcanconf.exe)
4.  Support


--------------------------------------------------------------------------------------------

1. Supported Operating Systems 
------------------------------

                Windows XP    Windows      Windows 7    Windows 7    Windows 8    Windows 8
                 (32 Bit)  Vista (32 Bit)  (32 Bit)     (64 Bit)     (32 Bit)     (64 Bit)
 setup.exe          X            X            X            X            X            X
 CANcardXL          X            X            X            X            -            -
 CANcardXLe         X            X            X            X            -            -
 CANcaseXL          X            X            X            X            -            -
 CANcaseXL log      X            X            X            X            -            -
 CANboardXL         X            X            X            X            -            -
 CANboardXL PXI     X            X            X            X            -            -
 CANboardXL PCIe    X            X            X            X            -            -
 VN1610             X            X            X            X            -            X
 VN1611             X            X            X            X            -            X
 VN1630             X            X            X            X            -            X
 VN1640             X            X            X            X            -            X
 VN2600             X            X            X            X            -            -
 VN2610             X            X            X            X            -            -
 VN2640             X            X            X            X            -            -
 VN3300             X            X            X            X            -            -
 VN3600             X            X            X            X            -            -
 VN7600             X            X            X            X            -            -
 VN5610             X            -            X            X            -            -
 VN7570             X            -            X            X            -            -
 VN8910-USB         X            X            X            X            -            -
 VN8910-Ethernet    X            -            X            X            -            -
 Vector Keyman      X            X            X            X            X            X
 Vector USB Dongle  X            X            X            X            -            -

 Legend:
   X  Supported
   -  Not supported

1.1 Operating System Requirements
----------------------------------
- For Windows XP at least Service Pack 3 is required.
- For Vista at least Service Pack 2 is required.
- For Windows 7 at least Service Pack 1 is required.
- Windows RT is not supported


--------------------------------------------------------------------------------------------

2. Device Driver Installation, Update and Uninstall
---------------------------------------------------

All Installation and Uninstallation actions should be done with the Vector Driver Setup
(Setup.exe located in the download package or the drivers folder on the Vector Driver Disk).
For all operations Administrator rights are required.

For additional help and information please refer to the installation manual shipped with the 
driver CD or available on the Vector internet homepage (http://www.vector.com, section 
support). 

For troubleshooting please refer to the installation manual of the corresponding device.


--------------------------------------------------------------------------------------------

3. Vector Hardware Configuration utility (vcanconf.exe) 
-------------------------------------------------------

The Vector Hardware Configuration utility (vcanconf.exe) gives you the ability to 
configurate all installed Vector Hardware. It is located in your Control Panel under 
'Vector Hardware' or on your driver CD. 


--------------------------------------------------------------------------------------------

4. Support 
----------

If you need technical support, you find additional information on the Vector internet 
homepage (http://www.vector.com) or contact Vector by mail (see mail addresses listed below) 
and send the following information: 
    - logfile generated by the Vector Hardware Configuration Utility 
    - version number of the driver
    - version number of the device's firmware  
    - serial number of the hardware
    - application software you're using 
    - your computer system 
    - your operating system 
    - description of your problem 
    

Vector Support E-Mail addresses: 
  - support@vector.com
  - support@cn.vector.com
  - support@fr.vector.com
  - support@in.vector.com
  - support@jp.vector.com
  - support@kr.vector.com
  - support@se.vector.com
  - support@uk.vector.com
  - support@us.vector.com

--------------------------------------------------------------------------------------------
